• Free Personalization
     
  • Lifetime Guaranteed Products
     
  • Made in USA
     
0

$0.00

View Cart Checkout

Your cart is empty. Continue Shopping

Stainless Steel Rivet-On Dog Collar Name Plate - 3/4 Inch x 2 3/4 Inch

Product ID: ID-00573

Price: $10.00

In Stock • 100% Satisfaction Guaranteed
Estimated Production Time: 1 to 2 business days.

Reviews

  • Constructed of Solid Stainless Steel Material
  • Rust & Corrosion-Proof
  • Easy to Install
  • Installation Hardware Included
  • Engraving Guaranteed
  • Curved for Best Fit to Collar
Take a closer look ...

 

  • Stainless steel material.
  • 2 3/4 inches long x 3/4 inches wide.
  • Up to 4 lines of text with 20 characters per line.
  • Supplied rivets accommodate collars up to 1/4 inch thick. If you need longer rivets than this, please indicate your dog's collar thickness in the comments section of your order and we'll send rivets with appropriate length.
  • Three two-piece rivets are supplied with each nameplate ordered...One extra just in case you need it.
  • Recommended for flat collars only of 1 inch width or more. For collars less than 1 inch wide, we recommend our Narrow Brass Dog ID Nameplates or our Narrow Stainless Steel Dog ID Nameplates.
  • Plate comes bent for best fit to collar. If you would prefer your plate to be flat, please request that in the order notes at checkout. 

 

  • Customize your Dog ID Tag with your own unique font! Arial is the default font we use if you would rather not choose.

    Not sure what to have engraved on your Dog Collar Nameplate or how to install it? Click the following links for help...
    Engraving Text Examples
    Nameplate Installation Instructions

    Please fill in the blanks with the text you would like engraved on your Dog ID Nameplate. Feel free to use all engraving lines and characters allowed but please keep in mind that the more characters and lines used, the smaller the characters will be. All text will be centered horizontally and vertically unless you specify otherwise in the comments section of your order.
Stainless Steel Rivet-On Dog Collar Name Plate - 3/4 Inch x 2 3/4 Inch
Already Asked: 9 Questions, 48 Answers
Sort by:
dogIDs Store asked: Why did you choose this?
Herbert B: Had it before and it was great. No rusting, even after the ocean (many times). May 9, 2013
Kiersten W: I can't keep my dog out of the water, which results in her losing tags constantly. She never loses this type of tag so I know she always has ID on her. Apr 20, 2013
Nora H: Because we have lost all the traditional dog tags that hang from the collar. Apr 15, 2013
Matt M: Needed some quality tags that wouldn't wear out or easily come off. Decided to give this a shot! Apr 13, 2013
GREGORY I: Good size.
Customizable.
Good service.
(Thanks, Chuck!)
Apr 12, 2013
Kristin S: Want ID tag to be sturdy part of collar. Sick of jangling dog tags. Feb 27, 2013
Melaney C: our dog has a collar that this could easily be attached to. Feb 26, 2013
Polly S: My dog loves to go into the bush and regular dog tags either fall off or they fade. The Rivet-On Dog Collar Name Tag stays on the collar, so I don't have to worry about it getting lost and it does not fade so last for years. The only reason why I am ordering a new one is our contact phone numbers have changed. Totally Recommend this product. Feb 19, 2013
A shopper asked: Can these be used on only leather collars or can they be used on nylon collars too? Dec 30, 2012
Answer this · Send to friends Good question? Yes (0) No (0)
Gayle D: I see no reason why you couldn't use them on a nylon collar except you'll have to "burn" the hole to melt the nylon just a liitle so it doesn't frey Might work best to use a hot nail to make the hole. Feb 20, 2013
Reply to Gayle Good answer? Yes (0) No (0)
R W: I get it with the ring and attach to our regular dog collar ring where
you attach th leash
Works perfect and looks great
Feb 18, 2013
Reply to R Good answer? Yes (0) No (0)
Emma M: I use them on my dogs nylon collars. I just heat up a mail and use it to burn a hole through the nylon so that it doesn't gray. Feb 20, 2013
Reply to Emma Good answer? Yes (0) No (0)
erin a: both... a nailhead would make a hole in the leather easier Feb 18, 2013
Reply to erin Good answer? Yes (0) No (0)
Rebecca D: You attach it to the collar with a loop, so has long as the collar has that typical metal loop that you attach tags to, you should be fine Feb 17, 2013
Reply to Rebecca Good answer? Yes (0) No (1)
A shopper asked: Can you use this on a waterproof dog collar? Sep 12, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Chuck BStaff: Yes, the plate and rivets are stainless steel. Chuck B. Staff Sep 12, 2013
Reply to Chuck Good answer? Yes (0) No (0)

Personalization
Add to Wish List
>

Stainless Steel Rivet-On Dog Collar Name Plate - 3/4 Inch x 2 3/4 Inch reviews verified by Reevoo

(9.4 out of 10)
Quality
9.5
Design
9.3
Appearance
9.6
Overall Rating
9.4
Scores 9.4 out of 10 based on 41 reviews
(4 out of 10)

Evan

New Hampshire US
+
Nice looking (and quiet!) tag that won't get caught on anything.
The rivets provided are junk and won't keep the tag on the collar.
Confirmed purchase: May 30 2014
Published on: August 09 2014
(10 out of 10)

Jeanne

Northern California US
+
I got just what I saw on the site, no disappointments. I chose one with rivets instead of the slide because of the type of collar I'm using for puppy training. I couldn't be happier, no clanging tags.
Reviewer left no comment
Confirmed purchase: May 12 2014
Published on: June 11 2014
(10 out of 10)

Terry

US
+
Well made and easy to read
none
Confirmed purchase: March 18 2014
Published on: May 16 2014
Subscribe to our newsletter.

We believe in giving back to the animals in our lives who give us so much.
If you do too, be our pal!

100% Satisfaction Guarantee.
Need help or have a question? Call us! 800.720.8247

Monday through Friday,
9AM to 5PM CST.


Did you know?

As seen on

© Copyright dogIDs.com. All Rights Reserved.